Project Spotlight
Updated 11/22/02
Project Spotlight
Updated 11/22/02
This "ongoing project" SeaVee
290i had Bennett ST16 Trim Tabs installed during
production at the SeaVee factory. We followed the contruction progress of this
boat from early in production to completion. See the links below to view
pictures
from various stages of production. Check back soon for the sea trial results.
| The Boat: SeaVee 290i Length Overall: 29'6" Beam: 8'3" Draft: 32" Weight (w/o motor): 3,400 lbs. Deadrise: 25 degrees Engine: Cummins Turbo Diesel Type: Inboard Horsepower: 270 hp |
|
| Trim Tab System: Bennett ST16 Sport Tabs |
 |
Installation Notes:
The Bennett ST 16 Sport Tabs fit this SeaVee hull very well. The 12" span
is narrow enough to fit this SeaVee's unique transom design, and the 16" chord length
helps to provide enough lift for a boat of this size. The Hydraulic Power Unit (HPU)
fit well into the stern near Cummins diesel. The console on this SeaVee is large
enough to give several mounting options for the Rocker Switch Control. It was
conveniently mounted on the console just below the throttle control/gear selector to make
trim adjustments quickly when changing throttle settings.
Stern Quarter shows both ST16 Trim Tabs
Rocker Swictch Control installed below throttle control
Click the following dates to view pictures of this SeaVee during production from 9/24/02, 10/04/02, 10/22/02, and 10/26/02.
Sea Trial Results:
Check back for future page updates including sea trial results.
Home What Trim Tabs Do Trim Tab Kits Sizing Guidelines Installation Instructions F. A. Q. Links Trimdicators Auto Tab Control Auto Tab Retractor Hatch Lifters New M80 & M120 Sport Tabs
Prices and Parts
About Bennett Marine Contact Us Warranty Troulbeshooting Project Boats
